My Bird Photography Setup: Camera, Lens and More

Introduction

Hi, my name is Taka. I’m a bird photographer based in Sydney, Australia. I take photos and videos of native Australian birds, mainly parrots such as galahs, eastern rosellas and sulphur-crested cockatoos.

I use my photography to raise awareness about birds and wildlife, create fundraising products, and, of course, show people that birds aren’t simply creatures with wings. They have their own personalities, behaviours and emotions.

My hope is that through my content, I can encourage more people to understand, appreciate and respect not only birds, but wildlife in general.

And to do that, I need the right equipment.

In this article, I’d like to share the photography and videography equipment I use, why I chose it, and what my experience has been like using it in the field.


Main camera: Canon EOS R7

Specification

Canon EOS R7

Sensor

APS-C CMOS

Resolution

32.5MP

ISO

100–51,200

Continuous Shooting

Up to 30fps

Image Stabilisation

5-axis IBIS

Video

4K 60p

Processor

DIGIC X

Memory Cards

Dual SD UHS-II

Weight

Approx. 612g


One of the main reasons I chose the R7 was that I saw many other bird photographers using and recommending it. It seemed to offer very good image quality without being as expensive as some higher-end professional cameras.

Another reason I chose the R7 is its APS-C sensor. Without getting too technical, it basically gives me 1.6x the reach compared with a full-frame camera, which is very useful for bird photography.

That extra reach also helps me maintain a safe and respectful distance from the birds I photograph.

If you’d like to learn more about different sensor sizes and their pros and cons, there are plenty of articles and videos out there that explain the differences in much more detail.

I bought the Canon R7 for around $1,700 AUD in early 2025.

I haven’t used other camera brands or many other Canon mirrorless models, so I can’t tell you whether the R7 is better or worse than its competitors. I can only share my own experience with it.

And so far, that experience has been very positive.

I use my camera around four to five times a week. Most of the time, I visit parks around Sydney to photograph birds, although I occasionally travel to places such as the mountains to look for rarer parrots like glossy black-cockatoos.


A male glossy black cockatoo (Around 8000 left in the wild)

On average, I probably shoot around 500 photos per week, along with roughly an hour of video footage.

I haven’t taken the camera into extremely harsh environments. The lowest temperature it has probably experienced is around 2°C, while the highest would be somewhere around 40–45°C during hot Sydney weather. Humidity generally isn’t too extreme where I use it, and when I’m at home, I store my camera in my room with a dehumidifier running.

Under these conditions, the camera has held up very well.

I’ve only had one real issue with it.

Around a year after buying it, I noticed that the rubber grip on the camera was starting to peel off. I don’t know whether I would be considered a heavy user, but seeing the grip start peeling after only about a year was a little disappointing.

I took it to Canon, and luckily, they replaced it free of charge as a goodwill repair. I was very grateful for that.

Lens: Canon RF 100–500mm 


Specification

Canon RF 100–500mm f/4.5–7.1L IS USM

Lens Mount

Canon RF

Focal Length

100–500mm

Maximum Aperture

f/4.5–7.1

Lens Construction

20 elements in 14 groups

Aperture Blades

9

Minimum Focusing Distance

0.9m

Maximum Magnification

0.33x

Image Stabilisation

Up to 5 stops

Autofocus Motor

Dual Nano USM

Dimensions

93.8 × 207.6mm (retracted)

Weight

Approx. 1,530g

Filter Size

77mm


Finding the right lens for my bird photography was much more difficult.

I spent countless hours watching YouTube videos and reading blogs from other bird photographers before I finally decided on the Canon RF 100–500mm.

It certainly isn’t a budget lens.

Mine cost just under $4,000 AUD, and at the time, I remember wondering whether I was crazy to spend that much money on a lens when I had only recently started bird photography.

However, when I was researching lenses, almost every option suitable for bird photography was expensive. If I wanted enough reach to photograph birds from a reasonable distance while maintaining good image quality, I was looking at four-digit prices, even for some second-hand lenses that were available at the time.

After reading and watching so many positive reviews from professional bird and wildlife photographers, I eventually decided to take the chance on the 100–500mm.

I went to one of my local camera shops, bought it, brought it home and held it properly for the first time.

My immediate reaction was:

‘Wow. This is bigger and heavier than I thought.’

Is It Too Heavy?

The weight definitely makes handheld shooting more difficult over long periods.

My arms start getting tired after a few minutes, particularly when I’m filming and trying to keep the camera in the same position.

However, I’ve also found one unexpected advantage to the weight: it can help me keep the camera more stable on windy days.

So while the weight can be tiring, it isn’t always a disadvantage.

Is 500mm Enough for Bird Photography?

People might wonder whether a 100–500mm lens gives you enough reach for bird photography.

From my experience, yes, because as mentioned earlier, I mainly photograph parrots. They’re generally much larger than some of the tiny birds I see in my local parks, such as superb fairy-wrens and welcome swallows.

For the birds I usually photograph, the Canon R7 paired with the 100–500mm works very well.

The R7 also has a 32.5MP sensor, which gives me quite a bit of flexibility when cropping my photos afterwards.

Here are some examples:

Lens zoomed all the way out (RAW photo)

Just cropped and adjusted colour and brightness. Not upscaled.

Very impressive, isn't it? The image still looks quite sharp.

What About Low-Light Conditions?

How does this camera and lens combination perform at dawn, dusk or on cloudy days?

Again, I can’t tell you how it compares with every other camera and lens combination because I simply haven’t used them.

From my own experience, though, I don’t think it performs too badly.

In lower light, I sometimes need to increase the ISO, which can introduce more noise into the image. However, modern photo-editing software can do a surprisingly good job of reducing noise and improving the final image.

Learning how to edit your photos is something I highly recommend. I think it’s an extremely useful skill for photographers, and I’ll talk more about editing later in this article.

Lens Filter: Urth 77mm UV Lens Filter

Attached to my lens is a protective UV filter.

For me, its main purpose is simply to provide an extra layer of protection for the front of my lens.



I know some photographers don’t like using protective UV filters because they believe they can affect image quality.

Personally, I haven’t noticed a difference.

Maybe that’s because I’m still an amateur, but for me, the peace of mind is worth it. 

Microphone: Sennheiser MKE 200


Specification

Sennheiser MKE 200

Colour

Black

Dimensions

69 × 60 × 39mm

Connection Port

3.5mm locking jack

Maximum Sound Pressure Level

120 dB

Pickup Pattern

Supercardioid

Sensitivity

-33 dBV/Pa

Transducer Type

Pre-polarised condenser

Connector

3.5mm


High-quality audio is something that can easily be overlooked when creating wildlife videos.

There’s no point filming a beautiful yellow-tailed black-cockatoo making its incredible calls if the audio sounds terrible.

The microphone I use is the Sennheiser MKE 200. I bought mine for around $150 AUD.

It’s relatively small and lightweight, which is important when I’m already carrying a camera and large telephoto lens.

It’s a directional microphone, meaning it focuses mainly on capturing sound coming from in front of it while reducing sound coming from the sides and behind.

That doesn’t mean it completely eliminates background noise. If someone behind me starts speaking loudly, the microphone will still pick them up, but their voice generally won’t be as prominent.

It also has wind-noise protection, including the fluffy external windscreen that goes over the microphone.

This definitely helps, but it doesn’t make the microphone completely windproof. On extremely windy days, some wind noise can still make its way into the recording.

Camera Strap: Peak Design Cuff wrist strap

My Canon R7 and 100–500mm lens have a combined weight of just over 2kg, so having a strong and reliable strap is extremely important.

I’m very happy with this product. It feels very secure, and I’m confident that if my camera slips out of my hand, the strap will prevent it from falling to the ground.

It also doesn’t feel restrictive around my wrist and is comfortable to wear.

Tripods and Monopods: Benro Cyanbird Aluminium Tripod & IFOOTAGE Cobra 3 Strike Monopod

I’ve used both tripods and monopods for bird photography and videography.

They serve a similar purpose but have different pros and cons.

When I first started, I used them quite often, especially for video. They helped me capture stable footage and made it possible to film for much longer periods.

With my current camera and lens combination, my arms usually start giving up after around four minutes of continuous handheld filming!

I bought the tripod first and took it to parks and on most of my bird photography trips. The stability a tripod provides is incredible.

Here is a video of a gang-gang cockatoo that I filmed using a tripod in Canberra, Australia’s capital city:



About a year later, I decided to give a monopod a go after seeing many bird photographers using them and talking about how much faster they are to set up compared with a tripod.

And yes, I can definitely attest to that.

The trade-off, however, is stability. Even a small gust of wind can cause the monopod and camera to wobble, resulting in shaky footage. It’s still much better than filming completely handheld, though.

However, in recent months, I’ve found myself using tripods and monopods much less often.

There are a few reasons for this:

  1. I have to carry more gear.
    When I’m walking around parks looking for birds, every extra piece of equipment adds weight.

  2. Setting them up takes time.
    Birds don’t wait for photographers. I’ve missed plenty of great opportunities because I was still setting up my equipment.

  3. They attract attention.
    When people see a camera on a tripod, they naturally become curious and sometimes come over to see what I’m filming.

I also once had an off-leash dog come out of nowhere and almost knock over my entire setup, even though I was in an area where dogs were required to be on a leash.

  1. Video stabilisation software has become surprisingly good.
    I use DaVinci Resolve to stabilise some of my handheld footage, and I’ve been really impressed with what it can do.

For those reasons, I now prefer shooting handheld in many situations, or I use my “kneepod”. Adjusting the height is super easy. It’s just a matter of bending my knee!


Kneepod in action

Sub camera: Insta360 Luna Ultra


Specification

Insta360 Luna Ultra

Main Sensor

1-inch

Telephoto Sensor

1/1.3-inch

Main Lens Aperture

f/1.8

Telephoto Aperture

f/2.0

Maximum Video Resolution

8K at 30fps

4K Video

Up to 120fps

Zoom

Up to 12x

Lossless Zoom

Up to 6x

Stabilisation

3-axis gimbal

Tracking

Deep Track 5.0

Screen

Detachable 2-inch OLED touchscreen

Internal Storage

47GB

Memory Card

microSD up to 2TB

Microphones

4

Battery Life

Up to 240 minutes

Weight

Approx. 233–235g

Dimensions

52.4 × 169.9 × 38.5mm

I bought the Insta360 Luna Ultra for several reasons.

It can shoot wide-angle footage, has a built-in microphone with wind protection, can zoom up to 12x, with up to 6x lossless zoom, has a built-in gimbal, and best of all, it has a tracking feature.

I just tell the camera to focus on my face, and it tracks me as I move.

And all of that is packed into a device that can fit in my pocket.

When I’m creating content, my Canon R7 and 100–500mm lens are primarily used to capture the birds themselves.

The Insta360, on the other hand, allows me to capture more of the environment around the subject, something my 100–500mm lens simply isn’t designed to do.

I also use it when I want to talk directly to the camera.

You can also buy a slide case, which is sold separately. I have one myself, and it works great.

It clips onto the camera, and I can simply slide it up to protect the head when the camera isn’t in use, then slide it back down when I want to use it.

The camera does come with its own case, but it’s quite large and takes more time to put on and take off. The slide case is much quicker and more convenient for me when I’m out filming.

Editing Software

Taking the photo or video is only one part of the process. Editing also plays a big part in my work.

Luminar Neo

I use Luminar Neo to edit my photos.

Here is their website: Luminar Neo

One of the things that initially appealed to me was the option of a one-off payment.

I’ve been using it since I started bird photography, and I’ve been very happy with it.

It also offers tutorial videos, which were incredibly useful when I was starting out because I had zero experience with photo editing.

Every single photo I upload to my social media has undergone some editing, such as cropping and adjusting the brightness and saturation.

Reason being is that I shoot all my photos in RAW rather than JPEG. I won’t get too technical here, but if you want to edit your photos, shooting in RAW gives you much more flexibility.

Original photo (RAW)


Edited photo

Canva

I use Canva to add text to my photos. There are lots of different templates available, which is great for people with little to no experience in graphic design, like myself.

Here is their website: Canva

I’m terrible at designing, but I’m learning as I go through trial and error and by seeking advice from others.



DaVinci Resolve

When I first started editing videos, I was deciding between Adobe Premiere Pro and DaVinci Resolve.

Both are widely used for professional video editing, but I eventually chose DaVinci Resolve after hearing so many positive things about it. The availability of a free version was also a major advantage because it meant I could try the software before committing to it.

I now use DaVinci Resolve almost every day to edit my videos, and I absolutely love it.

Here is their website: DaVinci Resolve

It wasn’t easy to get my head around at first.

It probably took me at least a month before I started feeling comfortable using it. But once I became familiar with the software, it allowed me to create content faster and experiment with more creative ways of editing my videos.

Check out one of my recent videos that I made to raise awareness about cigarette butt littering. I used the Insta360 to film myself picking up the butts and talking to the camera. I used my Canon R7 and 100–500mm lens to capture footage of the birds, and then put everything together in DaVinci Resolve.

It took me over an hour to put the video together, but it was well worth the effort because it helped me raise awareness and reach people around the world.

How I Learnt Photography, Videography and Editing

The only formal training I’ve had was a one-week intensive videography course.

I’ve written a separate article about that course, including why I took it, what I learnt and what the overall experience was like.

Click to read article

Other than that, I’m mostly self-taught.

Like many beginners, I started by watching countless YouTube videos from other bird photographers. I also read books, blogs and articles about camera settings, photography techniques and editing.

Eventually, though, I reached a point where I felt completely overwhelmed.

There was so much information.

Rather than helping me move forward, I felt stuck and was drowning in information.

One photographer would recommend one setting, while another would recommend something completely different. I was trying to remember everything at once, and eventually I just became confused.

So I thought:

“You know what? I’m just going to go to my local park and start taking photos.”

And that’s what I did.

I photographed birds, changed settings, turned different dials, made mistakes, looked at the results and tried again.

It took me a few months to properly understand the ins and outs of my camera and lens, but something else happened during that process.

I started discovering my own style of bird photography. Just like artists, photographers each have their own unique style. In a way, I believe we are artists too.

For anyone curious, I now shoot in manual mode.

Check Out Our YouTube Vlogs

My partner and I started creating vlogs not too long ago. We visit different parks and document the birds we see. My partner is from Japan, so she makes her vlogs in Japanese, while I make mine in English.

I edit all of our videos, and if you compare some of our earlier vlogs with the more recent ones, you can see how much my editing has improved. I’m still working to improve the quality of our videos, so if you have any tips or advice, feel free to leave a comment.


My partner's YouTube vlog playlist

My YouTube vlog playlist

One Very Important Tip for Improving Your Bird Photography

If I had to give one important piece of advice to someone getting into bird photography, it would be this:

Learn and understand the behaviour of your subject.

When I first started bird photography, I fell into the trap of thinking that expensive gear and good editing skills were the most important components of becoming a good bird photographer.

Don’t get me wrong. Equipment and editing are important.

But over time, I’ve realised that understanding the bird you’re photographing can be just as important, if not more important.

Why?

Because understanding behaviour helps you anticipate what might happen next.

That gives you a few valuable seconds to prepare yourself. Maybe you need to change your camera settings or the position of your camera, or maybe you need to change your posture.

Those few seconds can make the difference between getting the shot and missing it completely.

Here’s one example.

I love taking photos of galahs “power walking”, with their little legs moving quickly and looking very determined, as if they’re heading to work on a busy Monday morning.

Here is an example:


So how do I get these shots?

Galah pairs often stay very close to each other. When they’re on the ground foraging, however, sometimes they become so focused on eating that they end up separated.

When that happens, one bird may suddenly hurry over to rejoin its partner.

Because I’ve observed this behaviour many times, when I see a pair becoming separated while foraging, I know there’s a chance that one of them will soon start power walking towards the other.

I don’t know exactly which bird will do it or exactly when it will happen.

But I can be ready.

And that dramatically increases my chances of getting the shot.

Below is another example:

I really like getting shots of sulphur-crested cockatoos with their crests raised.


From my observations, they may raise their crests when they’re excited, alert or reacting to something happening around them.

One thing I’ve learnt to listen for is the warning calls of noisy miners.

They can act like a natural alarm system. When they detect potential threats, such as a dog or bird of prey, they make loud warning calls.

When I hear those calls, I know to pay attention.

Birds in the surrounding area may suddenly become alert. Cockatoos may stop what they’re doing, stand upright and raise their crests.

Sometimes they’ll take off as well.

Because I understand what those warning calls can mean, I can prepare my camera before the action happens rather than reacting after it has already started.

And that, to me, is one of the biggest lessons I’ve learnt from bird photography:

The better you understand birds, the better prepared you are to photograph them.

Conclusion

Thank you so much for reading this blog. I hope my experience has been helpful if you’re thinking about getting into bird photography, and that you’ve enjoyed getting a little glimpse into my work.

Our mission at Jurassic Parrot is to make the world a better place for birds. Although my impact may still be small, I hope that by continuing to improve my content and getting my message out to more people, I can help make a difference.

I truly believe that a better world for birds is possible.

I’d also like to thank everyone who has been so supportive of my mission. Your support means a lot to me and motivates me to keep going.

Follow Me on Social Media


Taka

Comments